!RjBlCIbsLDzHBIzmaA:nixos.org

NixOS on ARM

987 Members
NixOS on ARM — Support: AArch64 is supported and cached; armv6 and armv7 are best effort, without any official cache. — Documentation: https://wiki.nixos.org/wiki/NixOS_on_ARM — Community build box: https://github.com/nix-community/aarch64-build-box → build box status: https://status.nixos.org/grafana/d/5LANB9pZk/per-instance-metrics?orgId=1&refresh=30s&var-instance=147.75.77.190 —238 Servers

Load older messages


SenderMessageTime
3 Jun 2025
@k900:0upti.meK900That's probably just Nbase-x then12:49:16
@k900:0upti.meK900That should be very much bog standard12:49:33
@magic_rb:matrix.redalder.orgmagic_rb
			FRITZ!SFP AON 			

ITU-T G.652; IEEE 802.3ah-2004 1000BASE-BX10

LC/APC 8°

Wavelength: TX 1310 nm, RX 1480 to 1580 nm

Full duplex transmission

Transmitter power: -9 to -3 dBm

Reception range: -3 to -23 dBm

Range: 10 km

Support for SFF-8472

Class 1 laser

12:50:00
@magic_rb:matrix.redalder.orgmagic_rbSome other source12:50:09
@magic_rb:matrix.redalder.orgmagic_rbCan i plug it in while the router is on?12:50:42
@magic_rb:matrix.redalder.orgmagic_rbHow much of a bad idea12:50:45
@k900:0upti.meK900Yes12:50:47
@k900:0upti.meK900Perfectly fine12:50:56
@magic_rb:matrix.redalder.orgmagic_rbHow do u know if it worjs? Im not at the new address so it probably wont connect12:51:29
@k900:0upti.meK900And yes it is 1000base-x12:51:32
@k900:0upti.meK900Do you have a fiber link at all?12:51:49
@k900:0upti.meK900If not you can just poke it with ethtool and see what comes out, I guess12:51:57
@magic_rb:matrix.redalder.orgmagic_rbDo you thibk i can connect this one at A when its for apartment B?12:51:58
@k900:0upti.meK900Who knows12:52:07
@magic_rb:matrix.redalder.orgmagic_rb
In reply to @k900:0upti.me
Do you have a fiber link at all?
Im not at the apartment where its for
12:52:10
@k900:0upti.meK900Depends on how they do auth12:52:15
@magic_rb:matrix.redalder.orgmagic_rbI have fiber here, same network12:52:18
@k900:0upti.meK900Is it the same kind of fiber though12:52:26
@k900:0upti.meK900Is the question12:52:30
@matthewcroughan:defenestrate.itmatthewcroughanIs it fiber, or fibre12:55:49
@emilazy:matrix.orgemilyit's fibre in en-GB and fiber in en-US.13:08:17
@emilazy:matrix.orgemilypretty unambiguously.13:08:25
@emilazy:matrix.orgemilylooks like it's "fibre" in en-CA and en-AU and everything else too.13:09:14
@magic_rb:matrix.redalder.orgmagic_rb @k900:0upti.me yeah no, here i have gpon there aon, here we have the option of up to 4gig, there only 1gig 13:28:13
@magic_rb:matrix.redalder.orgmagic_rbWe also tried the fritz and it would work, but the bpi did recognize the module and its just standard 1000base-x13:28:37
@magic_rb:matrix.redalder.orgmagic_rbSo it should just work tm when i move on the 11th13:28:45
@emilazy:matrix.orgemily you're moving to somewhere with point-to-point and it has lower bandwidth? 13:28:53
@emilazy:matrix.orgemilythat surprises me13:28:56
@magic_rb:matrix.redalder.orgmagic_rbAon is p2p?13:29:20
@magic_rb:matrix.redalder.orgmagic_rbWhats newer, like better gpon or aon?13:29:36

Show newer messages


Back to Room ListRoom Version: 6