| 8 Aug 2023 |
 Ms. Connection | huh ?? | 16:28:46 |
| Ms. Connection | you can't upgrade if you have the 8gb variant ? | 16:29:05 |
 misuzu | Finally compiled latest u-boot with pcie for vf2 | 17:42:21 |
| misuzu | Still broken, haha | 17:42:31 |
 raitobezarius | :') | 17:42:35 |
| misuzu | [ 5.648273] pci 0001:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0001:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 5.654890] starfive-dwmac 16040000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 5.674813] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[ 5.675396] starfive-dwmac 16040000.ethernet: Enabled L3L4 Flow TC (entries=1)
[ 5.683493] pci 0001:00:00.0: BAR 14: assigned [mem 0x38000000-0x380fffff]
[ 5.690083] starfive-dwmac 16040000.ethernet: Enabled RFS Flow TC (entries=10)
[ 5.697309] pci 0001:01:00.0: BAR 0: assigned [mem 0x38000000-0x38003fff 64bit]
[ 5.704178] starfive-dwmac 16040000.ethernet: TSO feature enabled
[ 5.711409] pci 0001:00:00.0: PCI bridge to [bus 01]
[ 5.718704] starfive-dwmac 16040000.ethernet: Using 40/40 bits DMA host/device width
[ 5.724801] pci 0001:00:00.0: bridge window [mem 0x38000000-0x380fffff]
[ 5.745104] pcieport 0001:00:00.0: PME: Signaling with IRQ 63
[ 5.762376] starfive-dwmac 16030000.ethernet end0: renamed from eth0
[ 5.766832] mmc_host mmc0: Bus speed (slot 0) = 204799999Hz (slot req 200000Hz, actual 199999HZ div = 512)
[ 5.787949] starfive-dwmac 16040000.ethernet end1: renamed from eth1
[ 5.791348] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 5.801479] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 5.813901] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000040000000890
[ 5.823193] mmc_host mmc1: Bus speed (slot 0) = 204799999Hz (slot req 200000Hz, actual 199999HZ div = 512)
[ 5.828340] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 5.838605] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 5.846216] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 5.854293] hub 1-0:1.0: USB hub found
[ 5.858147] hub 1-0:1.0: 1 port detected
[ 5.864676] hub 2-0:1.0: USB hub found
[ 5.868504] hub 2-0:1.0: 4 ports detected
[ 5.916417] nvme nvme0: pci function 0001:01:00.0
[ 5.921223] nvme 0001:01:00.0: enabling device (0000 -> 0002)
[ 6.190840] usb usb2-port2: over-current condition
[ 6.194808] mmc_host mmc0: Bus speed (slot 0) = 204799999Hz (slot req 100000Hz, actual 99999HZ div = 1024)
[ 6.250806] mmc_host mmc1: Bus speed (slot 0) = 204799999Hz (slot req 100000Hz, actual 99999HZ div = 1024)
[ 6.410819] usb usb2-port4: over-current condition
[ 6.416380] mmc0: Failed to initialize a non-removable card
[ 13.246815] xhci_hcd 0000:01:00.0: Error while assigning device slot ID: Command Aborted
[ 13.260537] xhci_hcd 0000:01:00.0: Max number of devices this xHCI host supports is 32.
[ 13.268574] usb usb1-port1: couldn't allocate usb_device
[ 16.095163] platform cpufreq-dt: deferred probe pending
[ 66.542814] nvme nvme0: I/O 12 QID 0 timeout, completion polled
Timed out for waiting the udev queue being empty.
kbd_mode: KDSKBMODE: Inappropriate ioctl for device
setfont: KDFONTOP: Inappropriate ioctl for device
starting device mapper and LVM...
waiting for device /dev/disk/by-label/NIXOS_ROOT to appear....[ 127.982824] nvme nvme0: I/O 24 QID 0 timeout, completion polled
[ 127.988842] nvme nvme0: Shutdown timeout set to 10 seconds
...................
Timed out waiting for device /dev/disk/by-label/NIXOS_ROOT, trying to mount anyway.
[ 189.422823] nvme nvme0: I/O 16 QID 0 timeout, completion polled
| 17:42:35 |
| raitobezarius | beautiful | 17:42:41 |
| misuzu | Yeah, still won't boot without efi partition on sd card | 17:44:31 |
| misuzu | * Yeah, still won't boot without efi partition on an sd card | 17:44:39 |
| misuzu | https://github.com/misuzu/nixos-vf2/commit/59c5c7b897feea515e5ed9cbe70a631193afd481 | 17:46:03 |
| misuzu | I've also enabled boot from usb | 17:46:19 |
| raitobezarius | nice | 17:46:25 |
| raitobezarius | do you put the nixos install on the SD or the eMMC? | 17:46:31 |
| misuzu | Didn't test though | 17:46:32 |
| misuzu | My root partition is on an nvme and efi partition is on an sdcard | 17:47:03 |
| misuzu | I've also enabled boot from emmc | 17:47:17 |
| misuzu | Don't know if oit works | 17:47:30 |
| misuzu | * Don't know if it works | 17:47:32 |
| raitobezarius | hm so you did succeed into installing stuff on an nvme? | 17:47:33 |
| raitobezarius | in my case, all the time, the nvme ends up falling out of the pcie busd | 17:47:42 |
| raitobezarius | * in my case, all the time, the nvme ends up falling out of the pcie bus | 17:47:43 |
| raitobezarius | and then I have to reboot to redetect it | 17:47:48 |
| misuzu | https://github.com/misuzu/u-boot/commit/355b187cda897494d7a1436b6897999f633a5fc9 | 17:47:49 |
| raitobezarius | so I can never finish installing nixos | 17:47:51 |
| misuzu | In reply to @raitobezarius:matrix.org
hm so you did succeed into installing stuff on an nvme? I've just copied my root partition from the sdcard to the nvme :D | 17:48:43 |
| * raitobezarius taps his forehead | 17:48:50 |
| misuzu | efi partition is still on the sd | 17:49:29 |
| misuzu | % lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
mmcblk1 179:0 0 1,8G 0 disk
├─mmcblk1p1 179:1 0 2M 0 part
├─mmcblk1p2 179:2 0 16M 0 part
└─mmcblk1p3 179:3 0 128M 0 part /boot
zram0 252:0 0 3,9G 0 disk [SWAP]
nvme0n1 259:0 0 232,9G 0 disk
├─nvme0n1p1 259:1 0 128M 0 part
└─nvme0n1p2 259:2 0 232,8G 0 part /nix/store
/
| 17:50:21 |
| misuzu | This is how it looks | 17:50:27 |
| misuzu | Maybe I should try without usb patch | 17:55:19 |
